Why is Scott’s Hotrods Different?
Scott’s will build your ’41-’48 Ford Car chassis specifically for you. Scott’s Hotrods ‘n Customs IS Quality, Engineering & Workmanship. 100% TIG Welded, 100% American Made, 100% Bad Ass.
- Features
- What's Included
- Options
- Request A Quote
- Installation Notes
- Limited Lifetime Warranty
- Recommended Parts
If you are looking for the MOST complete chassis available for your ’41-’48 Ford, you have come to the right place. Each and every chassis is Built-To-Order per the vehicle and customer specs. Coilovers (Casual Cruiser to ProTouring) or Airbags (Lay Frame/Rocker, Adjustable On-The-Fly Ride Height). You won’t find any leafs or drum brakes here.
Scott’s Coilover ’41-’48 Ford Chassis – From $12,190
Scott’s SuperSlam ’41-’48 Ford Chassis – From $12,928
SCOTT’S CHASSIS FEATURES Starting at $12,190
- Mandrel Bent 2”x4”x.120-wall tube frame rails
- 1-piece 2”x4”x3/16”-wall tube IFS Crossmember
- 8-Point 1-1/2” DOM tubular Chassis Crossmember
- Tubular Upper & Lower A-Arms, 1-1/8”x1/4”-wall DOM
- 100% TIG-welded
- Stainless Steel CNC Machined Fully Adjustable Upper A-Arm Rod Ends
- Oversized Serviceable Press-In Ball Joints
- Aldan American Single-Adjustable Coilovers or Airbags & Shocks
- Built-in Anti-Dive
- Manual Steering Rack & Pinion
- Standard or Drop Forged Steel Spindles
- Moser Ford 9” Housing & 31-spline axles, Fill & Drain Plug
- 1”-1/8”x1/4”-wall DOM tubing bars (adjustable RH- & LH-Thread)
- Stainless Steel CNC Machined Rod Ends – RH- & LH-Thread
- 1”-1/8”x1/4”-wall DOM tubing Panhard bar (adjustable RH- & LH-Thread)
- FK Bearing Heim Joints – RH- & LH-Thread
- 4-Bar Rear-End Housing Brackets
- 4-Bar Frame Brackets
- Body Mounts
- All Grade-8 hardware
- LIFETIME GUARANTEE
OPTIONS
- Custom Track Width & Ride Height
- Motor Mounts $168+
- Power Rack & Pinion Steering $280
- Right Hand Drive Power Rack & Pinion $899
- Drop-Out Transmission Crossmember $336
- Wilwood Mustang II ProSpindles $230
- 5 on 5.5 bolt pattern $336
- Standard 1” Solid Sway Bar $324
- Front Torsion Spline Sway Bar $700
- Rear Torsion Spline Sway Bar $700
- Scott’s Watts Link $995
- Wilwood 11”, 12”, 13”, 14” Complete Brake Kits $1,625+
- Moser 3rd Member with POSI and choice of gears $1,800 Truetrac or $2,000 Wavetrac
- Handcrafted Aluminum Baffled Fuel Tank w/Sending Unit $750 Carb or $1,145+ EFI
- Stainless Steel Fuel Lines Plumbed $710 Carb or $1,170+ EFI
- Stainless Steel Brake Lines Plumbed w/flex lines $1,065
- Parking Brake Cables $150
- Powder Coating & Reassembly $3,000
COILOVER OPTIONS
- Aldan American Single-Adjustable (Rebound) (included)
- Aldan American Double-Adjustable (Rebound/Compression) $1,120
- RideTech by FOX Single-Adjustable (Rebound) $1,456
- RideTech by FOX Triple Adjustable (Rebound/High & Low Compression) $3,696
*Ford Rear Sump Oil Pan Required
*GM Performance Parts LS Engine Oil Pan 12628771
A qualified professional mechanic or fabricator with the technical understanding of product function and installation procedures must install all Scott’s Hotrods products.
We stand behind ALL of the parts we manufacture. Other parts that we do not manufacture such as brakes, steering racks, ball joints, brake flex lines, power steering lines, etc carry their own manufacturers warranties. We are not responsible for these items outside of their original warranty.
All of Scott’s Hotrods manufactured parts are guaranteed to be free of defects in materials & workmanship for the lifetime of the part. Scott’s Hotrods warranty is non-transferable.
*Ford Rear Sump Oil Pan Required SBF M-6675-A50
*GM Performance Parts LS Engine Oil Pan 12628771
Scott’s Hotrods manufactures the most complete chassis on the market for ANY Year/Make/Model vehicle from 1925 to 1987.
Every car project can benefit from replacing the old, worn out and weak stock chassis with a brand new, rigid, American made custom chassis. Every Scott’s Chassis is fully built from raw materials using our chassis tables and vehicle-specific jigs to ensure tighter-than-factory tolerances.
We engineer chassis for all different types of applications: Street Cruiser, ProStreet, ProTouring, Low Static Ride Height, 100% Stock-Appearing or completely laid out on the ground. Our SuperSlam Chassis will lay frame 100% front to back. All of our chassis are set up for your desired ride height, your handling characteristics and your custom track or wheelbase.
All Scott’s chassis feature our IFS & 4-Bar with either Coilovers or Airbags with external shocks and Disc Brakes on all four corners. We do not offer lesser quality components leaf springs and drums brakes.
We even build complete chassis for Unibody vehicles, giving them the rigidity they so desperately need. The chassis and crossmembers are built to accommodate the full seating area; unlike other chassis manufacturers that use cookie-cutter chassis patterns & components that can cause you to lose some seating room.
Our application-specific, custom tubular crossmember, or square tube x-member in some cases, is tailored to the specific application of each customer.
Although the little things can get overlooked by other manufacturers, floor clearance, exhaust clearance and rigidity are essential traits for every custom chassis we build. We take the extra time to make sure all of the little things are not overlooked.
